The Ottilo System

$249

A home microneedling system with a solenoid pen and a desktop controller. The pen runs only while it is pressed to the skin, depth is set on the pen from 0.25 to 2.5 mm, and the colour screen shows speed, depth and a session timer.

Includes 5 cartridges.

  • Free US shipping
  • Ships from US stock
  • No charges on delivery
  • 60-day returns
  • 1-year warranty

What’s in the box

  • Ottilo pen with detachable cable
  • Ottilo controller
  • US power supply
  • 5 sealed, single-use needle cartridges
  • Storage pouch for the pen
  • Quick-start card

How it works

The pen holds a small coil and a magnetic plunger. Each pulse from the controller drives the plunger forward and a spring returns it, so the needles move in a straight line at an even rhythm. A ring near the tip sets how far the needles extend, from 0.25 to 2.5 mm.

A pressure switch inside the pen keeps it still until the tip is pressed to the skin. Lift the pen and it stops. The controller holds the electronics, which keeps the pen slim and light, and gives room for a proper dial and a colour screen.

Target specification

Drive Solenoid linear actuator: coil, plunger and return spring
Stroke 2.5 mm, fixed
Needle depth 0.25 to 2.5 mm, set by a ring on the pen
Activation Pressure switch in the pen: runs only while pressed to the skin
Speed 8 levels, set with the controller dial
Screen Colour display showing speed, depth, cartridge type and timer
Timer Off, 5, 10 or 15 minutes
Noise 55 dB or less
Session length Built for 30 minutes of continuous use without overheating
Connection Detachable cable between pen and controller
Power Plug-in US power supply

Ottilo is in development. These figures are design targets for the production unit and may change before launch.

Cartridges

Each cartridge is sealed and used once. Replacement cartridges come in packs of 10.

Care

Turn the dial back to zero, remove the used cartridge and wipe the pen body down. The pen and controller are not waterproof.